This video is created by, and property of, the Gorilla Repair Shop but we think it is a perfect and concise overview of the process of removing the stock TonePump from a Spector® Euro and installing the LHZ-03 preamp.
Today we take a look at the HL-1 HAZard LAMPS Pedal, which is designed to give you that classic “Haz” tone on the floor. This pedal was designed for players using Spector® basses (with EQ dimed) who need to use a passive bass for a few songs. The HL-1 allows a passive bass to have the same EQ, dynamic feel, and signature high-frequency overtones as a USA Spector® bass. No, it will not make a Fender® sound like a Spector®!…
In this we will go through a few of the most common questions regarding the LHZ-03 bass preamp: What’s in the box? Will it fit in my bass? How do I take the liner off the 3M VHB tape? One of the joys of this project is talking to players of every experience level. Truly, there is no such thing as a dumb question! I enjoy sharing what I know and helping others on their tone journey, so if you…
This is a Spector Rebop 5 model with a 40P5 at the neck, 40TW at the bridge (in Single Coil mode), and the LHZ preamp.
This is a Spector Skylar Accord model with a 40P5 at the neck, 40DC at the bridge, and the LHZ preamp. Audio chain is a Mesa Subway DI Preamp into my PreSonus interface. There are no effects or overdrive, just a little bit of compression.
We are excited to announce that we are getting to launch two new products: the LHZ-03 preamp and the much-anticipated HAZard LAMPS stombox. LHZ-03 PREAMP The LHZ-03 is a redesign of the LHZ-01 and LHZ-02 preamps that takes the last year of feedback from hundreds of clients to make multiple improvements. It’s smaller, easier to install, easier to fit into tight spaces. The best feature of all: no more needing to choose between a solder version or a pin header…
View and Download the LHZ-03 Installation Manual right here! This is a living document that is constantly being updated as we create new installation diagrams for clients that have unique wiring challenges. Don’t see the diagram you need? Let us know! CURRENT VERSION PREVIOUS VERSIONS
The LHZ preamp does exactly what the original 80’s HazLabs did: the EQ was specifically tuned for US Spector® basses. The circuit design is unique in that the initial stage greatly boosts the treble before the EQ stage, and then that boost is removed. This causes the preamp to generate high frequency harmonic content that acts somewhat like an exciter to bring out more detail, particularly when the EQ is boosted. The end result depends on your playing dynamics. If…
Looking to swap out your barrel jack for a new unit? Here’s the part numbers you want!
Or, save yourself the soldering and order a prewired Switchcraft from the LHZ Shop.
This is a Bass & Drums only solo section demo of a Spector Euro 4 with LHZ Preamp. Bass is recorded over isolated Vinnie Paul drum track.
