Whether it’s and in-depth technical analysis, preamp comparison, tech tip, review, or just some inspiration that’s worth sharing, here it is!
Finished with your new preamp install, plugged in, and all you have is the sound of silence? No worries! This is almost always due to a missed or incorrect connection in the circuit. In this video, I’ll walk you through a series of 5 tests that will identify where the problem with the signal is. You can get the Troubleshooting Flowchart here: Troubleshooting Steps
QwikChord was a guitar chord diagram illustration tool that was first released as freeware in 2002 and became a retail application used worldwide by authors, teachers, students, and worship team leaders. We still receive email from clients, so we’ve decided to re-release the original QwikChord on the LHZ website. You find it here: https://lhzpreampshop.com/products/qwikchord
One of the most common questions we receive is: “what do I need to do a solderless installation?” Over half of our clients install preamp upgrades with no soldering skills! Yet, there are some installation scenarios that require connecting existing wires to wires from the preamp kit. This video shows how a IDC (Insulation Displacement Connector) can be used to splice wires without needing a soldering iron or special skills.
We understand that buying products without being able to try them first is scary. Learn how LHZ takes the risk out of the process with a no-nonsense return policy and first-class personal support.
This is an in-depth technical analysis and audio comparison of the TonePump preamp and the LHZ Preamp intended to provide objective data to help players understand the differences in tone and feel that they experience when switching between these two preamps.
Bassist Paul McFadden recently upgraded his Spector CST from the stock configuration (EMG X-series P/J pickups and Legacy preamp) to the LHZ preamp with the new MID-03 Midrange control and a set of EMG PJ (CS) pickups. The challenge was that while the stock configuration was great for his traditional rock band, he needed a warmer tone for his funk / groove band.
Fede Delfino took a little time between tour dates to record a playthrough of “What’s Left Of Us” by Magnetico using his Spector Euro LX that he’d recently upgraded with LHZ Preamps.
Can you hack a modular volume control to blend two pickups AND acts as a master volume pot? Yes you can!
We often get questions about batteries from clients who are used to passive instruments: In this video we look at how preamp batteries discharge over time to answer these questions, and compare a standard Alkaline battery against a common NiMH rechargeable battery.
If you find yourself getting unusual noise from your one-piece wireless transmitter on your guitar or bass, you may have a noise injection issue. Noise injection is most often noticed in ultra-low power preamps when using guitar transmitters that use a 3-conductor TRS plug. There are a few factors that can cause this: Compact one-piece transmitters use the RING and SLEEVE of the plug to recharge their internal batteries when docked. This requires an electronic circuit to monitor the RING…
